The Toyota Corolla has been round lengthy sufficient that many house owners discover themselves needing to interchange the manufacturing unit stereo. Installing a new stereo within the Toyota Corolla provides improved sound and up to date features. Swapping out the stereo within the Toyota Corolla takes fundamental tools and fewer than an hour. This article covers fashions from 1990 to 2000.
Toyota Corolla Car stereo Installation Instructions
1. Open the hood and remove the destructive battery cable from the terminal. Apply the parking brake and place the car in “D.”
2. Take away the trim from around the stereo by prying along with your fingers at one corner. Some early models have two screws at the prime of the trim piece to remove first. Permit the trim to hang on the drivers facet of the dash if it is connected to the cigarette lighter.
3. Find and take away the 4 screws holding the stereo in place. Pull the radio out of the dash and disconnect the wires from the again of the head unit.
4. Join the wiring harness adaptor to the unique harness and let it grasp from the dash. Slide the brand new stereo into the Toyota radio mounting kit, which is a thin metal cover and secure it per the manufacturer’s instructions. Most adaptors have screws to carry the stereo in place, nevertheless some have clips, which interact automatically.
5. Plug the wiring harness adaptor and antenna wire into the again of the new head unit and push the whole meeting into the dash. Reconnect the damaging battery cable and switch the radio on.
6. Ensure all of the stereo controls and speakers are working. Safe the radio in the dash with the unique 4 screws and exchange the trim.
